The two most common distinctions between customer classes are load size and usage profile. In many cases, time-of-use (TOU) and load factor are more significant factors than load size. Contribution to peak-load is an extremely important factor in determining customer rate class. Consumer loads may be characterized as peak, off-peak, baseload, and seasonal. Utilities rate each load differently, because each has different implications for a power system.
Texas currently produces and consumes more electricity than any other state in the country. This energy consumption is due to its size, but the ample land makes it a major producer of wind power – a renewable, or green, energy source. The environmentally friendly energy created by wind power is available to many Texas residents to supply the electricity in their home or business.
Knowing how much electricity you use each month is important to finding the cheapest electricity plan. For Houstonians, usage is typically the lowest in the winter and highest in the summer. Your specific usage levels can be determined by simply looking back at previous electric bills and finding the kWh used. To avoid electric bill surprises during the peak summer months, you’ll need to accurately know your peak electricity usage which typically occurs in August.
Aside from times of natural disasters and large-scale accidents, electricity prices tend to be steadily dictated by electricity demand. Typically, the price of electricity rises when demand rises. In turn, the lower demand is, the cheaper electricity rates become. This pattern is due to the fact that increased demand requires increased energy production. When extra energy is demanded, utilities are forced to use alternative sources of energy production that may cost more to operate. For example, when electricity demand reaches a high point in Texas, coal plants are used alongside the typical natural gas plants. These coal plants are costlier and less effective than natural gas plants, but are necessary to meet high electricity demand levels.[1]
*Save Over £390 - Over 10% of the estimated quotations raised by users of the Simply Switch Website to switch their gas and electricity suppliers between 01/02/2015 - 01/06/2015 produced a predicted annual saving of £390 or more. Current combined spend for gas and electricity of between £84 and £6869. Savings may have included Direct Debit and online discounts. Energy prices vary by usage and postcode.
For example, in 2012, Hawaii residents had the highest average residential electricity rate in the United States (37.34¢/kWh), while Louisiana residents had the lowest average residential electricity costs (8.37¢/kWh). Even in the contiguous United States the gap is significant, with New York residents having the highest average residential electricity rates in the lower 48 U.S. states (17.62¢/kWh).[6]
 1.     Contracts:  Before, there were no contracts.  You signed up or you didn’t.  When it’s the only game in town, you have to play by their rules.  Nowadays, you’ll see these ultra-fabulous rates bandied about but it’s only by carefully scrutinizing the fine print that you’ll discover those wonderful rates come with a one-year lock-down or other catches.
Residents of California paid an average of 19.65 cents per kilowatt hour (kWh) for their electricity in July, one of the highest rates in the country and well above the U.S. average of 13.12 cents/kWh. However, they use an average of 547 kWh per month, well below the U.S. average of 897. That leaves the state with a Choose Energy Price Index score of 92.9, which places it 17th nationally.

On the other hand, month-to-month variable rate (no-contract) plans don’t have cancellation fees. You won’t be penalized if you find a better deal elsewhere and want to make another switch.  And, you won’t be stuck paying more than you should be if the market rate for electricity trends down.  But, if it goes up, you’ll be paying more than your in-contract neighbors, and you’ll likely want to shop around again for a better deal.

Even though customers in deregulated cities routinely pay more for electricity, there is a bright spot. The gap between the average price paid for electricity between deregulated cities like Houston and regulated cities like San Antonio have dwindled to the narrowest point ever to 8.8 percent. Back in 2006, customers in deregulated cities were paying nearly 47 percent more for electricity than their counterparts in regulated cities.
The inclusion of renewable energy distributed generation and AMI in the modern electricity grid has introduced many alternative rate structures. Simple (or fixed) rate, tiered (or step) rate, TOU, demand rates, tiered within TOU, seasonal, and weekend/holiday rates are among the few residential rate structures offered by modern utilities. The simple rate charges a specific dollar per kilowatt ($/kWh) consumed. The tiered rate is one of the more common residential rate programs, and it charges a higher rate as customer usage increases. TOU and demand rates are structured to help maintain/control a utility’s peak demand. The concept at its core is to discourage customers from contributing to peak-load times by charging them more money to use power at that time.
You can sort, filter, and shop by pricing at YOUR specific usage level, which lets you shop and compare electricity plans based on the rates you’ll actually experience on your bill, inclusive of hidden fees and taxes. This ensures you’re not misled by the cheaper rates often advertised by electric providers…those “teaser rates” associated with higher usage levels that many households never enjoy because their usage level never reaches that pricing tier.
Electric rates for companies vary greatly by industry and function. Although homes come in all shapes and sizes, businesses have larger variations with diverse needs – from industrial buildings to mom-and-pop businesses. In July, for example, the average business in Oregon paid 9.41 cents per kWh. With this number, we can deduce that on average companies in the state paid about $591 that month for electricity.    
There’s some smart money placing big bets on a rebound for oil. Blackstone Group LP BX, +0.75%  President Hamilton “Tony” James said last month that the company was “scrambling” to invest up to $10 billion in energy companies, according to Bloomberg. Blackstone CEO Stephen Schwarzman said during the company’s earnings call on Jan. 29 that the majority of Blackstone’s energy investments were “oil-price agnostic, including energy-transportation infrastructure where we have off-take agreements, merchant power, renewables and other types of energy-oriented investing.”

Prepaid electricity plans are yet another option available to Texas customers. Prepaid plans let you avoid credit checks and deposits by pre-paying for your electricity. Prepaid electricity plans typically do not have a fixed duration and operate on a pay-as-you-go basis. Shopping for prepaid electricity can often yield relatively cheap electricity with no deposit. See Prepaid Electricity: Is It Right For Me? for more.

At Quick Electricity, we’ve outlined the best Texas electricity plans ranging from one month to two years. No deposit electricity plans are great for people who are constantly moving, college students, renters, or those who want to try an electric company before locking themselves into a fixed rate energy plan. Long-term plans are for people who want to lock in a low rate, and not have to worry about fluctuations in that rate for quite a while.
On the one hand, long-term, fixed-rate (contract) plans offer stability in pricing. If energy supply costs suddenly go up in your area, you won’t be left paying more than what you bargained for.  You’ll have peace-of-mind.  If you want to switch out of your contract before it ends with a lower cost plan, you’ll likely face a cancellation fee (early termination fee).
Unlike with long-term plans, monthly, variable rate (no-contract) plans have no cancellation fees. You won’t have to pay a penalty if you decide to take your business elsewhere because you found a better deal. Plus, you won’t be left paying more than you should if the market rate for energy trends down. However, if the market prices rise, you’ll have to pay more than those who are in-contract.