Switching your energy provider online through our website is quick, easy and hassle-free. Don’t miss out on saving money through our price comparison service simply because you think it will be a long, drawn-out process. The whole thing need not take over ten minutes and by doing so you could be saving hundreds of pounds a year with a cheaper electricity supplier.
Another unwelcome side effect of not knowing your average monthly kWh usage level is that you may end up paying more than you expect. This can occur when a customer inadvertently shops an electric rate based on a higher usage level than they actually use. Electricity suppliers commonly advertise their electric rates associated with the highest (2000 kWh) usage levels since those tend to be the lowest rates.
On the one hand, long-term, fixed-rate (contract) plans offer stability in pricing. If energy supply costs suddenly go up in your area, you won’t be left paying more than what you bargained for.  You’ll have peace-of-mind.  If you want to switch out of your contract before it ends with a lower cost plan, you’ll likely face a cancellation fee (early termination fee).
Excessive Total Harmonic Distortions (THD) and not unity Power Factor (PF) is costly at every level of the electricity market. Cost of PF and THD impact is difficult to estimate, but both can potentially cause heat, vibrations, malfunctioning and even meltdowns. Power factor is the ratio of real to apparent power in a power system. Drawing more current results in a lower power factor. Larger currents require costlier infrastructure to minimize power loss, so consumers with low power factors get charged a higher electricity rate by their utility.[130] True power factor is made of displacement power factor and THD. Power quality is typically monitored at the transmission level. A spectrum of compensation devices[131] mitigate bad outcomes, but improvements can be achieved only with real-time correction devices (old style switching type,[132] modern low-speed DSP driven[133] and near real-time[134]). Most modern devices reduce problems, while maintaining return on investment and significant reduction of ground currents. Power quality problems can cause erroneous responses from many kinds of analog and digital equipment, where the response could be unpredictable.
Ironically, technology can make the utilities’ problem worse, not better—at least in the short term. In the past, grids were developed because it was cheaper to generate large quantities of power and distribute it over wide distances, rather then generate smaller quantities closer to the place of use. It is for this reason that electricity is seen as a business that benefits from “economies of scale”.
Even though customers in deregulated Texas markets routinely pay more for electricity, there is a bright spot. The gap between the average price paid for electricity between deregulated and regulated market has shrunk to 8.8 percent. In 2006, customers in deregulated cities were paying nearly 47 percent more for electricity than their counterparts in regulated cities.
The inclusion of renewable energy distributed generation and AMI in the modern electricity grid has introduced many alternative rate structures. Simple (or fixed) rate, tiered (or step) rate, TOU, demand rates, tiered within TOU, seasonal, and weekend/holiday rates are among the few residential rate structures offered by modern utilities. The simple rate charges a specific dollar per kilowatt ($/kWh) consumed. The tiered rate is one of the more common residential rate programs, and it charges a higher rate as customer usage increases. TOU and demand rates are structured to help maintain/control a utility’s peak demand. The concept at its core is to discourage customers from contributing to peak-load times by charging them more money to use power at that time.
3.     Customer service:  When the only utility available has lousy customer service, nobody is surprised.  They don’t even pretend to care – they know they have you over a barrel.  With all these new players in town, however, it’s a slap in the face to be treated like royalty until you’ve signed on the dotted line and now they won’t even return your calls or the person on the phone can’t string three English words together or if he does speak English, he’s brand new and panicking trying to pull up your account information.
In addition to having a healthy dose of Texas pride, we also pride ourselves on providing friendly customer service. Amigo Energy customer service comes in a variety of convenient ways—from our mobile app and desktop portal, to our US-based call center with over 500 customer service agents. No matter which type of Amigo Energy customer support you choose, you’re sure to get the service you need in the timeframe you want it.
But competition didn't necessarily end up cutting prices, according to the report. One contributing factor is confusion among customers as they try to choose among scores of retail electricity providers and the overwhelming variation of plans, leading many to just stick with familiar companies rather than look for better deals, according to the Texas Coalition for Affordable Power .
There was a time when electricity was electricity.  Like so many other places around America, in Houston, electricity didn’t mean “cheap electricity”.  But you moved into your home and you called the utility and they turned on the power and the bill came in and you paid it every month.  Oh, sure, you might grumble at the amount but then you’d go around and yell at the kids for leaving the lights on and the TV blaring with nobody in the room or maybe you’d look into buying more energy-efficient appliances.  When it came down to it, the Bill was the Bill.  Either you paid the bill or you ate dry packet meals, had cold showers, and watched TV by peering through the neighbor’s window after dark (preferably once they’d turned the TV on).  What’s that?  You want cheap electricity?  Sure thing:  call 1-800-WHO-CARES any time during regular business hours of 2:17am to 3:04am Sundays only.
Technology that now allows smaller quantities of power to be generated closer to the end-users at prices not too much higher than grid-based power are undermining those economies of scale. More efficient turbines, for example, allow large power users like cement plants and petrochemical factories to come off the grid. Today the limiting factor for large companies to come off the grid often isn’t the efficiency of the power generation technology, but the lack of easy availability of fuel, such as gas or coal to power these turbines Even this problem is being solved by innovations like mini-liquefied natural gas projects.
There was a time when electricity was electricity.  Like so many other places around America, in Houston, electricity didn’t mean “cheap electricity”.  But you moved into your home and you called the utility and they turned on the power and the bill came in and you paid it every month.  Oh, sure, you might grumble at the amount but then you’d go around and yell at the kids for leaving the lights on and the TV blaring with nobody in the room or maybe you’d look into buying more energy-efficient appliances.  When it came down to it, the Bill was the Bill.  Either you paid the bill or you ate dry packet meals, had cold showers, and watched TV by peering through the neighbor’s window after dark (preferably once they’d turned the TV on).  What’s that?  You want cheap electricity?  Sure thing:  call 1-800-WHO-CARES any time during regular business hours of 2:17am to 3:04am Sundays only.
Electricity pricing (sometimes referred to as electricity tariff or the price of electricity) varies widely from country to country and may vary significantly from locality to locality within a particular country. Many factors go into determining an electricity tariff, such as the price of power generation, government subsidies, local weather patterns, transmission and distribution infrastructure, and industry regulation. “Electricity prices generally reflect the cost to build, finance, maintain, and operate power plants and the electricity grid.”[1] Some utilities are for-profit, and their prices will also include a financial return for shareholders and owners. Electricity tariffs vary by type of customer, typically by residential, commercial, and industrial connections. Electricity price forecasting is the method by which a generator, utility company, or large industrial consumer can predict the wholesale prices of electricity with reasonable accuracy. The cost to supply electricity varies minute by minute.[1]
Because prices from energy companies in Maryland rise and fall depending on the wholesale price of energy, residents may want a more stable rate for a longer period. A fixed-rate energy plan offers you just that, with a consistent rate for the duration of your agreement at current energy prices – regardless of fluctuations in the energy market. This could mean protection from rate spikes and savings for electric utility customers.

Your most effective weapon, however, is a site like ComparePower (Power to Choose) to locate and compare details from various Houston electricity resellers.  In one fell swoop, you will efficiently and quickly locate and classify cheap electricity resellers all on one page, instead of wasting your valuable time searching out available companies and visiting their websites one by one (who even does that any more?).


Excessive Total Harmonic Distortions (THD) and not unity Power Factor (PF) is costly at every level of the electricity market. Cost of PF and THD impact is difficult to estimate, but both can potentially cause heat, vibrations, malfunctioning and even meltdowns. Power factor is the ratio of real to apparent power in a power system. Drawing more current results in a lower power factor. Larger currents require costlier infrastructure to minimize power loss, so consumers with low power factors get charged a higher electricity rate by their utility.[130] True power factor is made of displacement power factor and THD. Power quality is typically monitored at the transmission level. A spectrum of compensation devices[131] mitigate bad outcomes, but improvements can be achieved only with real-time correction devices (old style switching type,[132] modern low-speed DSP driven[133] and near real-time[134]). Most modern devices reduce problems, while maintaining return on investment and significant reduction of ground currents. Power quality problems can cause erroneous responses from many kinds of analog and digital equipment, where the response could be unpredictable.
Utility companies are responsible for transmission and delivery of electricity even in energy deregulated parts of Texas and should be contacted in the event of a power outage. Your retail energy supplier may provide you competitive electric rates or exceptional customer service, but they cannot repair power lines or restore your service. In the case of an emergency, contact:
At ElectricityPlans, we’re here to do one thing – help you find the best electricity plan to fit your needs. We are big advocates of electricity competition and your power to choose your own electricity provider. We offer completely unbiased electricity plans and display accurate, transparent pricing to take the guesswork out of choosing your electricity plan.

Texas currently produces and consumes more electricity than any other state in the country. This energy consumption is due to its size, but the ample land makes it a major producer of wind power – a renewable, or green, energy source. The environmentally friendly energy created by wind power is available to many Texas residents to supply the electricity in their home or business.
There are over 60 different energy suppliers competing for your business on any given day in Texas. Many of these electric companies have websites that are confusing and nearly impossible to navigate, their rates and fees hidden by dense industry jargon and misleading advertising. Who has the spare the time to sort through the choices spread out over all these different sites and companies?
×