The two most common distinctions between customer classes are load size and usage profile. In many cases, time-of-use (TOU) and load factor are more significant factors than load size. Contribution to peak-load is an extremely important factor in determining customer rate class. Consumer loads may be characterized as peak, off-peak, baseload, and seasonal. Utilities rate each load differently, because each has different implications for a power system.
No. When you’ve chosen a new deal, your new supplier will handle the switching process. They’ll contact you to let you know what date you’ll be transferred over, and they’ll contact you around the switching date to ask for a meter reading. They’ll pass this on to your old supplier so they can send you a final bill. You don’t need to contact your old supplier, as the new supplier will handle everything for you.
*Save Over £390 - Over 10% of the estimated quotations raised by users of the Simply Switch Website to switch their gas and electricity suppliers between 01/02/2015 - 01/06/2015 produced a predicted annual saving of £390 or more. Current combined spend for gas and electricity of between £84 and £6869. Savings may have included Direct Debit and online discounts. Energy prices vary by usage and postcode.
When you use our rate comparison process, providers know that they are competing to win your business. Consequently, they offer cheap electric rates in hopes of becoming your new Texas electricity company. This benefits both you and the provider you select. You receive a cheap electric rate and the plan of your choice, and the provider adds another satisfied customer.
Knowing how much electricity you use each month is important to finding the cheapest electricity plan. For Houstonians, usage is typically the lowest in the winter and highest in the summer. Your specific usage levels can be determined by simply looking back at previous electric bills and finding the kWh used. To avoid electric bill surprises during the peak summer months, you’ll need to accurately know your peak electricity usage which typically occurs in August.
Using an average of 1,063 kWh of power each month, Houston’s electricity consumption rates exceed the national average by over 100 kWh. As a city however, it does manage to maintain a lower monthly energy charge than the rest of the US, incurring an average fee of $99 in comparison to the $112 national monthly average. To further save on their plans each month, residents can choose from a selection of Texas-based energy suppliers and service plans.
Excessive Total Harmonic Distortions (THD) and not unity Power Factor (PF) is costly at every level of the electricity market. Cost of PF and THD impact is difficult to estimate, but both can potentially cause heat, vibrations, malfunctioning and even meltdowns. Power factor is the ratio of real to apparent power in a power system. Drawing more current results in a lower power factor. Larger currents require costlier infrastructure to minimize power loss, so consumers with low power factors get charged a higher electricity rate by their utility. True power factor is made of displacement power factor and THD. Power quality is typically monitored at the transmission level. A spectrum of compensation devices mitigate bad outcomes, but improvements can be achieved only with real-time correction devices (old style switching type, modern low-speed DSP driven and near real-time). Most modern devices reduce problems, while maintaining return on investment and significant reduction of ground currents. Power quality problems can cause erroneous responses from many kinds of analog and digital equipment, where the response could be unpredictable.