A feed-in tariff (FIT) is an energy-supply policy that supports the development of renewable power generation. FITs give financial benefits to renewable power producers. In the United States, FIT policies guarantee that eligible renewable generators will have their electricity purchased by their utility.[2] The FIT contract contains a guaranteed period of time (usually 15–20 years) that payments in dollars per kilowatt hour ($/kWh) will be made for the full output of the system.
Customers can find deals in competitive electricity markets if they take the time and effort to look at web sites such as powertochoose.org, the official comparison shopping site of the Public Utility Commission. The study cited a PUC survey of retail electricity offerings in Houston that showed nine deals in March that were lower than the regulated price of electricity in San Antonio.
Utility companies are responsible for transmission and delivery of electricity even in energy deregulated parts of Texas and should be contacted in the event of a power outage. Your retail energy supplier may provide you competitive electric rates or exceptional customer service, but they cannot repair power lines or restore your service. In the case of an emergency, contact:

Since consumer demand directly affects energy rates, it’s important to note seasonal trends of demand throughout the year. Overall, demand tends to be higher during the winter and summer months and lower during the fall and spring months. This pattern isn’t shocking since it’s normal for people to require more energy during extreme heat and extreme cold.
2.     Fraud:  Too many people have been victimized by glib sales reps with promises of cheap electricity flowing in an unending stream only to discover that, as is so often true, “it ain’t necessarily so”.  They’ve been locked into unwanted term contracts or there’s a catch – some utilities will give you the great rate only if you meet a usage minimum; basically, the “rate” is, in actuality, a “bulk purchase” discounted fee – or they paid a deposit never to hear from the rep again.
In summary, fixed-rate plans provide a level of certainty and stability in your energy charge since the price will not fluctuate over the life of your contract. If prices suddenly spike, you are protected because your rate is locked in. The flip side is that if rates drop over the life of your contract, you’ll be stuck paying the higher rate. You can incur steep cancellation fees if you change electricity plans or providers before the end of your contract term.

Then, in 2002, Texas deregulated the electricity market and everybody cheered!  Except that, sure, deregulation opened up the market to competition that may (or may not) have resulted in lower rates, but it introduced a whole host of other issues.  These issues may not have been factors before but now they’re critical when you’re on the look-out for cheap Houston electricity providers.

Even though customers in deregulated Texas markets routinely pay more for electricity, there is a bright spot. The gap between the average price paid for electricity between deregulated and regulated market has shrunk to 8.8 percent. In 2006, customers in deregulated cities were paying nearly 47 percent more for electricity than their counterparts in regulated cities.
Using an average of 1,063 kWh of power each month, Houston’s electricity consumption rates exceed the national average by over 100 kWh. As a city however, it does manage to maintain a lower monthly energy charge than the rest of the US, incurring an average fee of $99 in comparison to the $112 national monthly average. To further save on their plans each month, residents can choose from a selection of Texas-based energy suppliers and service plans.
Whether you live in a large city or small town, we can save you money! Where do we provide Texas electricity? We service customers in more than 400 deregulated communities in Texas. We work with principal utilities throughout the state of Texas to provide prepaid electricity. The utilities are: Oncor in the Dallas / Fort Worth Metroplex and various parts of West Texas; CenterPoint Energy in Houston and the surrounding areas; AEP Central in Corpus Christi and surrounding areas; AEP North in Abilene and other North Texas communities.
Even though customers in deregulated Texas markets routinely pay more for electricity, there is a bright spot. The gap between the average price paid for electricity between deregulated and regulated market has shrunk to 8.8 percent. In 2006, customers in deregulated cities were paying nearly 47 percent more for electricity than their counterparts in regulated cities.
Simply Switch is a trading name of MoneyExpert Limited. MoneyExpert does not give advice on or recommend any particular insurance product or service or whether it is suitable for your personal circumstances. The information provided is to help you to make your own choice about how to proceed. MoneyExpert is an appointed representative of MoneyExpert Insurance Services Limited which is authorised and regulated by The Financial Services Authority FRN 557120.
No. When you’ve chosen a new deal, your new supplier will handle the switching process. They’ll contact you to let you know what date you’ll be transferred over, and they’ll contact you around the switching date to ask for a meter reading. They’ll pass this on to your old supplier so they can send you a final bill. You don’t need to contact your old supplier, as the new supplier will handle everything for you.

ElectricityPlans makes shopping for electricity plans simple and intuitive. We give you the search tools you need to narrow your electricity plan search to specific contract lengths. In addition, you can use advanced search to narrow the search for the perfect electricity plan even further by searching for 100% renewable, prepaid plans, or electricity + extra stuff, for example. We also show each plan’s popularity over the past 30 days so you know what other electricity shoppers have selected.


The UK has been a net importer of energy for over a decade, and as their generation capacity and reserves decrease the level of importing is reaching an all-time high.[127] Their fuel price's dependence on international markets has a huge effect on the cost of electricity, especially if the exchange rate falls. Being energy dependent makes their electricity prices vulnerable to world events, as well.

In finding you the best Texas electric rates, we only list electric companies that have great business stability, excellent service, environmental awareness, and transparent pricing. This protects you from providers that could soon go out of business, are unattentive to customers, are environmentally unsound, or may end up charging you a higher rate than advertised.
Excessive Total Harmonic Distortions (THD) and not unity Power Factor (PF) is costly at every level of the electricity market. Cost of PF and THD impact is difficult to estimate, but both can potentially cause heat, vibrations, malfunctioning and even meltdowns. Power factor is the ratio of real to apparent power in a power system. Drawing more current results in a lower power factor. Larger currents require costlier infrastructure to minimize power loss, so consumers with low power factors get charged a higher electricity rate by their utility.[130] True power factor is made of displacement power factor and THD. Power quality is typically monitored at the transmission level. A spectrum of compensation devices[131] mitigate bad outcomes, but improvements can be achieved only with real-time correction devices (old style switching type,[132] modern low-speed DSP driven[133] and near real-time[134]). Most modern devices reduce problems, while maintaining return on investment and significant reduction of ground currents. Power quality problems can cause erroneous responses from many kinds of analog and digital equipment, where the response could be unpredictable.
Wind and solar power are non-dispatchable. Such power is normally sold before any other bids, at a pre-determined rate for each supplier. Any excess is sold to another grid operator, or stored, using pumped-storage hydroelectricity, or in the worst case, curtailed.[116] Curtailment could potentially significantly impact solar power’s economic and environmental benefits at greater PV penetration levels.[117] Allocation is done by bidding.[118]

When you use our rate comparison process, providers know that they are competing to win your business. Consequently, they offer cheap electric rates in hopes of becoming your new Texas electricity company. This benefits both you and the provider you select. You receive a cheap electric rate and the plan of your choice, and the provider adds another satisfied customer.
 1.     Contracts:  Before, there were no contracts.  You signed up or you didn’t.  When it’s the only game in town, you have to play by their rules.  Nowadays, you’ll see these ultra-fabulous rates bandied about but it’s only by carefully scrutinizing the fine print that you’ll discover those wonderful rates come with a one-year lock-down or other catches.
The two most common distinctions between customer classes are load size and usage profile. In many cases, time-of-use (TOU) and load factor are more significant factors than load size. Contribution to peak-load is an extremely important factor in determining customer rate class. Consumer loads may be characterized as peak, off-peak, baseload, and seasonal. Utilities rate each load differently, because each has different implications for a power system.
Technology also provides a long-term answer, even if it contributes to the problem in the short-term, as described earlier. As renewable power and storage technologies become cheaper and more efficient they will gradually allow for the implementation of cheaper mini-grids and smart grids, increasingly within the reach of the really poor, even in urban areas. Perhaps, grids will one day become marketplaces allowing people to sell excess power from their solar installations to those who have a need for power at that time. Prices can be set dynamically to allow supply to match demand.

Excessive Total Harmonic Distortions (THD) and not unity Power Factor (PF) is costly at every level of the electricity market. Cost of PF and THD impact is difficult to estimate, but both can potentially cause heat, vibrations, malfunctioning and even meltdowns. Power factor is the ratio of real to apparent power in a power system. Drawing more current results in a lower power factor. Larger currents require costlier infrastructure to minimize power loss, so consumers with low power factors get charged a higher electricity rate by their utility.[130] True power factor is made of displacement power factor and THD. Power quality is typically monitored at the transmission level. A spectrum of compensation devices[131] mitigate bad outcomes, but improvements can be achieved only with real-time correction devices (old style switching type,[132] modern low-speed DSP driven[133] and near real-time[134]). Most modern devices reduce problems, while maintaining return on investment and significant reduction of ground currents. Power quality problems can cause erroneous responses from many kinds of analog and digital equipment, where the response could be unpredictable.
The simplest model for day ahead forecasting is to ask each generation source to bid on blocks of generation and choose the cheapest bids. If not enough bids are submitted, the price is increased. If too many bids are submitted the price can reach zero or become negative. The offer price includes the generation cost as well as the transmission cost, along with any profit. Power can be sold or purchased from adjoining power pools.[112][113][114]

Short-term prices are impacted the most by weather. Demand due to heating in the winter and cooling in the summer are the main drivers for seasonal price spikes.[121] In 2017, the United States is scheduled to add 13 GW of natural-gas fired generation to its capacity. Additional natural-gas fired capacity is driving down the price of electricity, and increasing demand.


OPEC nations, along with Russia and Mexico, have refused to cut production, which is their traditional tool to prop up oil prices, out of fear of losing market share to the U.S., which has transformed the international oil market by greatly expanding hydraulic fracturing over the past decade. And U.S. producers might not lower production as quickly as some investors expect because of the significant improvement in the efficiency of horizontal fracturing wells.
Once you sign up for your new energy plan, your local utility will be notified of the change and begin your service from the alternative supplier at the beginning of your next billing cycle. Upon starting your energy supply service, your utility company will include this charge on your energy bill and continue to charge for the delivery service portion of your bill. Why? Because although your supplier may offer you a competitive rate for electricity supply, your utility is still in charge of the infrastructure that delivers energy to your home – such as power lines and energy meters.
Because prices from energy companies in Maryland rise and fall depending on the wholesale price of energy, residents may want a more stable rate for a longer period. A fixed-rate energy plan offers you just that, with a consistent rate for the duration of your agreement at current energy prices – regardless of fluctuations in the energy market. This could mean protection from rate spikes and savings for electric utility customers.
It’s very important to do your own research to understand the business focus of the company you are considering, as well as tax advantages (and possible disadvantages) if the company is a limited partnership. For example, Seadrill Ltd. SDRL, -1.72%  provides offshore-drilling services worldwide. Seadrill Partners LLC SDLP, -3.22%  operates offshore-drilling rigs under specific contracts with several major oil companies, including Exxon Mobil Corp. XOM, +0.17%  and Chevron Corp. CVX, -0.43%  

Knowing how much electricity you use each month is important to finding the cheapest electricity plan. For Houstonians, usage is typically the lowest in the winter and highest in the summer. Your specific usage levels can be determined by simply looking back at previous electric bills and finding the kWh used. To avoid electric bill surprises during the peak summer months, you’ll need to accurately know your peak electricity usage which typically occurs in August.
Switching your energy provider online through our website is quick, easy and hassle-free. Don’t miss out on saving money through our price comparison service simply because you think it will be a long, drawn-out process. The whole thing need not take over ten minutes and by doing so you could be saving hundreds of pounds a year with a cheaper electricity supplier.
In terms of renewable sources like solar and wind, weather impacts supply. California’s duck curve[cite] shows the difference between electricity demand and the amount of solar energy available throughout the day. On a sunny day, solar power floods the electricity generation market and then drops during sunless evening, when electricity demand peaks.[117]
Another unwelcome side effect of not knowing your average monthly kWh usage level is that you may end up paying more than you expect. This can occur when a customer inadvertently shops an electric rate based on a higher usage level than they actually use. Electricity suppliers commonly advertise their electric rates associated with the highest (2000 kWh) usage levels since those tend to be the lowest rates.
Whether you live in a large city or small town, we can save you money! Where do we provide Texas electricity? We service customers in more than 400 deregulated communities in Texas. We work with principal utilities throughout the state of Texas to provide prepaid electricity. The utilities are: Oncor in the Dallas / Fort Worth Metroplex and various parts of West Texas; CenterPoint Energy in Houston and the surrounding areas; AEP Central in Corpus Christi and surrounding areas; AEP North in Abilene and other North Texas communities.
×