*Save Over £390 - Over 10% of the estimated quotations raised by users of the Simply Switch Website to switch their gas and electricity suppliers between 01/02/2015 - 01/06/2015 produced a predicted annual saving of £390 or more. Current combined spend for gas and electricity of between £84 and £6869. Savings may have included Direct Debit and online discounts. Energy prices vary by usage and postcode.
Prices for any single class of electricity customer can vary by time-of-day called TOU or time of use or by the capacity or nature of the supply circuit (e.g., 5 kW, 12 kW, 18 kW, 24 kW are typical in some of the large developed countries); for industrial customers, single-phase vs. 3-phase, etc. Prices are usually highest for commercial and residential consumers because of the additional costs associated with stepping down their distribution voltage. The price of power for industrial customers is relatively the same as the wholesale price of electricity, because they consume more power at higher voltages. Supplying electricity at transmission-level high voltages is more efficient, and therefore less expensive.
We use our experience and connections in the electricity industry to find a plan that fits your needs. We provide you with a detailed report, with recommendations for making the right choice, so you can make an informed decision about which rate and plan are right for you. Once you select and approve your change, we handle it from there, so your transition to a new electricity provider is hassle-free. Have questions about switching to a lower electricity rate and a new service plan? Please call us today at 214-446-2210, or send us an email.
Fixed-rate plans: Fixed-rate plans give customers more stability for their monthly energy bills because the rate a customer signs up with is the rate he or she pays for the length of the plan’s contract. Most fluctuation comes with usage, though transmission and delivery charges and local fees also can change.. Because a fixed-rate plan sometimes spans two-three years, these plans often require a customer credit check and can include early cancellation fees. Fixed-rate plans, because of the continuing market volatility, probably are the best choice for many consumers.
The table below shows simple comparison of electricity tariffs in industrialised countries and territories around the world, expressed in US dollars. The comparison does not take into account factors including fluctuating international exchange rates, a country's purchasing power, government electricity subsidies or retail discounts that are often available in deregulated electricity markets.[5]
The average home in the U.S. consumes 897 kilowatt hours (kWh) of electricity per month. Bills vary by state and region, as cost per kWh differs. To estimate average energy bills, multiply the average home’s electricity usage (897 kWh) by the cost per kWh in your state for that month. For example, the average cost per kWh in July for Colorado homes was 12.67 cents, which amounts to an average bill of about $113.65 (12.67 cents x 897 kWh) that month.
In summary, fixed-rate plans provide a level of certainty and stability in your energy charge since the price will not fluctuate over the life of your contract. If prices suddenly spike, you are protected because your rate is locked in. The flip side is that if rates drop over the life of your contract, you’ll be stuck paying the higher rate. You can incur steep cancellation fees if you change electricity plans or providers before the end of your contract term.
Although electricity prices in the UK aren't cheap some countries have it much worse. In this article I'm going compare internationally to look at who is paying more $/kWh for their energy. I’ve gathered some numbers and crunched a little data to see who is really paying a lot for their power. For my neighbour here in the UK I’ll add a bit more data at the end.
Net metering is another billing mechanism that supports the development of renewable power generation, specifically, solar power. The mechanism credits solar energy system owners for the electricity their system adds to the grid. Residential customers with rooftop PV system will typically generate more electricity than their home consumes during daylight hours, so net metering is particularly advantageous. During this time where generation is greater than consumption, the home’s electricity meter will run backwards to provide a credit on the homeowner’s electricity bill.[3]
Energy Deregulation simply gives Texas residents the choice to select which electricity provider they want to use. In regulated cities, the state government restricts utility companies to only sell in their designated areas, taking the free market out of electricity. Texas deregulation gives the decision back to the consumer, and we’re happy to help make that decision easier.

In Dallas, 0% of people have switched to a plan that has some renewable energy component to it. Another 0% have switched to a plan that is partially renewable, while 0% have switched to a plan that powers homes completely by renewable electricity. This of course means that 100% of people have remained on a plan powered by traditional sources of electricity such as coal or nuclear power.

When it comes to pinpointing specific months rather than seasons, every part of the country has its own highest- and lowest-demand months. For example, hotter states, such as Texas, have their lowest demand anytime between December and March.[2] When it comes to your own location, you can determine typical demand trends by taking a look at your area’s weather patterns or your billing records that showcase your personal monthly demand levels.
In terms of renewable sources like solar and wind, weather impacts supply. California’s duck curve[cite] shows the difference between electricity demand and the amount of solar energy available throughout the day. On a sunny day, solar power floods the electricity generation market and then drops during sunless evening, when electricity demand peaks.[117]

In Maryland, you have the power to choose your electricity and natural gas suppliers. More than 500,000 Marylanders have already switched energy suppliers. Need a good reason to switch? Some suppliers regularly offer rates and service that are 10% or more cheaper than the utility. Things could get worse - Baltimore Gas and Electric Co. has proposed a rate increase it says would boost the average residential customer's total bill by $5.77 per month. A recent Choose Energy survey found that more than 86 percent say they've never chosen a competitive Maryland electricity plan, meaning they're probably paying more than they have to for energy. Don't pay more. Just enter your ZIP code above to see how you can begin saving with Choose Energy!
A feed-in tariff (FIT) is an energy-supply policy that supports the development of renewable power generation. FITs give financial benefits to renewable power producers. In the United States, FIT policies guarantee that eligible renewable generators will have their electricity purchased by their utility.[2] The FIT contract contains a guaranteed period of time (usually 15–20 years) that payments in dollars per kilowatt hour ($/kWh) will be made for the full output of the system.
At Quick Electricity, we’ve outlined the best Texas electricity plans ranging from one month to two years. No deposit electricity plans are great for people who are constantly moving, college students, renters, or those who want to try an electric company before locking themselves into a fixed rate energy plan. Long-term plans are for people who want to lock in a low rate, and not have to worry about fluctuations in that rate for quite a while.

In Texas' deregulated energy market, customers must pick their own electricity provider, all of which offer different rates per hour of power usage. You can shop for other power plans on the state-run website,  www.powertochoose.org, or try an alternative website, like www.texaspowerguide.com to help find the cheapest plan. Keep in mind that many retail electricity contracts carry penalties for early termination.
Even though customers in deregulated cities routinely pay more for electricity, there is a bright spot. The gap between the average price paid for electricity between deregulated cities like Houston and regulated cities like San Antonio have dwindled to the narrowest point ever to 8.8 percent. Back in 2006, customers in deregulated cities were paying nearly 47 percent more for electricity than their counterparts in regulated cities.
It is unlikely that you’ll see any change at all. You will be receiving the same electricity as you always have been, just from a different company. The only difference you definitely will see will be smaller charges for your electricity. By using our price comparison service you’ll be able to cut costs to your energy tariffs and save more money on electricity and gas.
Excessive Total Harmonic Distortions (THD) and not unity Power Factor (PF) is costly at every level of the electricity market. Cost of PF and THD impact is difficult to estimate, but both can potentially cause heat, vibrations, malfunctioning and even meltdowns. Power factor is the ratio of real to apparent power in a power system. Drawing more current results in a lower power factor. Larger currents require costlier infrastructure to minimize power loss, so consumers with low power factors get charged a higher electricity rate by their utility.[130] True power factor is made of displacement power factor and THD. Power quality is typically monitored at the transmission level. A spectrum of compensation devices[131] mitigate bad outcomes, but improvements can be achieved only with real-time correction devices (old style switching type,[132] modern low-speed DSP driven[133] and near real-time[134]). Most modern devices reduce problems, while maintaining return on investment and significant reduction of ground currents. Power quality problems can cause erroneous responses from many kinds of analog and digital equipment, where the response could be unpredictable.
Most common distribution network and generation is done with 3 phase structures, with special attention paid to the phase balancing and resulting reduction of ground current. It is true for industrial or commercial networks where most power is used in 3 phase machines, but light commercial and residential users do not have real-time phase balancing capabilities. Often this issue leads to unexpected equipment behavior or malfunctions and in extreme cases fires. For example, sensitive professional analogue or digital recording equipment must be connected to well-balanced and grounded power networks. To determine and mitigate the cost of the unbalanced electricity network, electric companies in most cases charge by demand or as a separate category for heavy unbalanced loads. A few simple techniques are available for balancing that require fast computing and real-time modeling.[135]
At Quick Electricity, we’ve outlined the best Texas electricity plans ranging from one month to two years. No deposit electricity plans are great for people who are constantly moving, college students, renters, or those who want to try an electric company before locking themselves into a fixed rate energy plan. Long-term plans are for people who want to lock in a low rate, and not have to worry about fluctuations in that rate for quite a while.
×