The inclusion of renewable energy distributed generation and AMI in the modern electricity grid has introduced many alternative rate structures. Simple (or fixed) rate, tiered (or step) rate, TOU, demand rates, tiered within TOU, seasonal, and weekend/holiday rates are among the few residential rate structures offered by modern utilities. The simple rate charges a specific dollar per kilowatt ($/kWh) consumed. The tiered rate is one of the more common residential rate programs, and it charges a higher rate as customer usage increases. TOU and demand rates are structured to help maintain/control a utility’s peak demand. The concept at its core is to discourage customers from contributing to peak-load times by charging them more money to use power at that time.
Every single energy supplier in the UK is regulated by Ofgem, the industry regulator. This means that the smaller, lesser-known companies have to follow exactly the same rules as the bigger, more established ones. If a company goes bust, you’ll be covered by Ofgem – they’ll ensure your supply isn’t cut off, and they’ll appoint a new supplier to take over your tariff.
The two most common distinctions between customer classes are load size and usage profile. In many cases, time-of-use (TOU) and load factor are more significant factors than load size. Contribution to peak-load is an extremely important factor in determining customer rate class. Consumer loads may be characterized as peak, off-peak, baseload, and seasonal. Utilities rate each load differently, because each has different implications for a power system.
No. When you’ve chosen a new deal, your new supplier will handle the switching process. They’ll contact you to let you know what date you’ll be transferred over, and they’ll contact you around the switching date to ask for a meter reading. They’ll pass this on to your old supplier so they can send you a final bill. You don’t need to contact your old supplier, as the new supplier will handle everything for you.
Electric bills for customers in the Houston area can more than double in summer months, mainly because air conditioning. Not coincidentally, electric rates also rise in the summer months because of this increase in demand. The most dramatic rate increases occur in month-to-month plans, but electric rates do increase across the board for all fixed-rate contract lengths.
A feed-in tariff (FIT) is an energy-supply policy that supports the development of renewable power generation. FITs give financial benefits to renewable power producers. In the United States, FIT policies guarantee that eligible renewable generators will have their electricity purchased by their utility.[2] The FIT contract contains a guaranteed period of time (usually 15–20 years) that payments in dollars per kilowatt hour ($/kWh) will be made for the full output of the system.

Snowpack, streamflows, seasonality, salmon, etc. all affect the amount of water that can flow through a dam at any given time. Forecasting these variables predicts the available potential energy for a dam for a given period.[124] Some regions such as the Egypt, China and the Pacific Northwest get significant generation from hydroelectric dams. In 2015, SAIDI and SAIFI more than doubled from the previous year in Zambia due to low water reserves in their hydroelectric dams caused by insufficient rainfall.[125]
Should you choose a short-term, long-term, month-to-month, or prepaid plan? The short answer: it depends on your specific needs. How long do you anticipate living at your location? Are you deciding in the peak season (summer in Houston) or off season? All electricity providers in Houston offer a broad selection of plans for different contract lengths. Many also offer month-to-month and prepaid electricity plans. The bottom line is that everyone’s needs are different and all contract term lengths offer advantages and disadvantages.

In Houston, 0% of people have switched to a plan that has some renewable energy component to it. Another 0% have switched to a plan that is partially renewable, while 0% have switched to a plan that powers homes completely by renewable electricity. This of course means that 100% of people have remained on a plan powered by traditional sources of electricity such as coal or nuclear power.

Texas electricity deregulation has given millions of Houston residents and businesses the power to choose the cheapest electricity rate. According to ERCOT, over 92% of Texas homes and businesses who live in deregulated areas have switched electric companies since deregulation began in 2002. Even though electric choice in Texas has been hugely successful for energy savings, customers are still confused by the options, terminology, and overall process of switching electric providers.

On the other hand, month-to-month variable rate (no-contract) plans don’t have cancellation fees. You won’t be penalized if you find a better deal elsewhere and want to make another switch.  And, you won’t be stuck paying more than you should be if the market rate for electricity trends down.  But, if it goes up, you’ll be paying more than your in-contract neighbors, and you’ll likely want to shop around again for a better deal.
Excessive Total Harmonic Distortions (THD) and not unity Power Factor (PF) is costly at every level of the electricity market. Cost of PF and THD impact is difficult to estimate, but both can potentially cause heat, vibrations, malfunctioning and even meltdowns. Power factor is the ratio of real to apparent power in a power system. Drawing more current results in a lower power factor. Larger currents require costlier infrastructure to minimize power loss, so consumers with low power factors get charged a higher electricity rate by their utility.[130] True power factor is made of displacement power factor and THD. Power quality is typically monitored at the transmission level. A spectrum of compensation devices[131] mitigate bad outcomes, but improvements can be achieved only with real-time correction devices (old style switching type,[132] modern low-speed DSP driven[133] and near real-time[134]). Most modern devices reduce problems, while maintaining return on investment and significant reduction of ground currents. Power quality problems can cause erroneous responses from many kinds of analog and digital equipment, where the response could be unpredictable.

Why are so many African power utilities effectively bankrupt? For one thing, they are incredibly inefficient. Efficiency can be improved by proper metering, investing in the system to reduce losses, improving collections and being able to cut off non-payers. This last one being easier if there is up-to-date metering and certain big players like government departments and military installations are also forced to obey the rules. These operational improvements and efficiencies will improve the supply of power but will not go far enough.

Aside from times of natural disasters and large-scale accidents, electricity prices tend to be steadily dictated by electricity demand. Typically, the price of electricity rises when demand rises. In turn, the lower demand is, the cheaper electricity rates become. This pattern is due to the fact that increased demand requires increased energy production. When extra energy is demanded, utilities are forced to use alternative sources of energy production that may cost more to operate. For example, when electricity demand reaches a high point in Texas, coal plants are used alongside the typical natural gas plants. These coal plants are costlier and less effective than natural gas plants, but are necessary to meet high electricity demand levels.[1]
Even though customers in deregulated Texas markets routinely pay more for electricity, there is a bright spot. The gap between the average price paid for electricity between deregulated and regulated market has shrunk to 8.8 percent. In 2006, customers in deregulated cities were paying nearly 47 percent more for electricity than their counterparts in regulated cities.
At ElectricityPlans, we’re here to do one thing – help you find the best electricity plan to fit your needs. We are big advocates of electricity competition and your power to choose your own electricity provider. We offer completely unbiased electricity plans and display accurate, transparent pricing to take the guesswork out of choosing your electricity plan.

Whether you live in a large city or small town, we can save you money! Where do we provide Texas electricity? We service customers in more than 400 deregulated communities in Texas. We work with principal utilities throughout the state of Texas to provide prepaid electricity. The utilities are: Oncor in the Dallas / Fort Worth Metroplex and various parts of West Texas; CenterPoint Energy in Houston and the surrounding areas; AEP Central in Corpus Christi and surrounding areas; AEP North in Abilene and other North Texas communities.