Snowpack, streamflows, seasonality, salmon, etc. all affect the amount of water that can flow through a dam at any given time. Forecasting these variables predicts the available potential energy for a dam for a given period.[124] Some regions such as the Egypt, China and the Pacific Northwest get significant generation from hydroelectric dams. In 2015, SAIDI and SAIFI more than doubled from the previous year in Zambia due to low water reserves in their hydroelectric dams caused by insufficient rainfall.[125]
 1.     Contracts:  Before, there were no contracts.  You signed up or you didn’t.  When it’s the only game in town, you have to play by their rules.  Nowadays, you’ll see these ultra-fabulous rates bandied about but it’s only by carefully scrutinizing the fine print that you’ll discover those wonderful rates come with a one-year lock-down or other catches.
Short-term prices are impacted the most by weather. Demand due to heating in the winter and cooling in the summer are the main drivers for seasonal price spikes.[121] In 2017, the United States is scheduled to add 13 GW of natural-gas fired generation to its capacity. Additional natural-gas fired capacity is driving down the price of electricity, and increasing demand.
Switching your energy provider online through our website is quick, easy and hassle-free. Don’t miss out on saving money through our price comparison service simply because you think it will be a long, drawn-out process. The whole thing need not take over ten minutes and by doing so you could be saving hundreds of pounds a year with a cheaper electricity supplier.
Prices for any single class of electricity customer can vary by time-of-day called TOU or time of use or by the capacity or nature of the supply circuit (e.g., 5 kW, 12 kW, 18 kW, 24 kW are typical in some of the large developed countries); for industrial customers, single-phase vs. 3-phase, etc. Prices are usually highest for commercial and residential consumers because of the additional costs associated with stepping down their distribution voltage. The price of power for industrial customers is relatively the same as the wholesale price of electricity, because they consume more power at higher voltages. Supplying electricity at transmission-level high voltages is more efficient, and therefore less expensive.

Studies show that generally demand for electricity is driven largely by temperature. Heating demand in the winter and cooling demand (air conditioners) in the summer are what primarily drive the seasonal peaks in most regions. Heating degree days and cooling degree days help measure energy consumption by referencing the outdoor temperature above and below 65 degrees Fahrenheit, a commonly accepted baseline.[123]
Electricity cannot be stored as easily as gas, it is produced at the exact moment of demand. All of the factors of supply and demand will therefore have an immediate impact on the price of electricity on the spot market. In addition to production costs, electricity prices are set by supply and demand.[120] However, some fundamental drivers are the most likely to be considered.

Customers can find deals in competitive electricity markets if they take the time and effort to look at web sites such as, the official comparison shopping site of the Public Utility Commission. The study cited a PUC survey of retail electricity offerings in Houston that showed nine deals in March that were lower than the regulated price of electricity in San Antonio.
 1.     Contracts:  Before, there were no contracts.  You signed up or you didn’t.  When it’s the only game in town, you have to play by their rules.  Nowadays, you’ll see these ultra-fabulous rates bandied about but it’s only by carefully scrutinizing the fine print that you’ll discover those wonderful rates come with a one-year lock-down or other catches.

The average home in the U.S. consumes 897 kilowatt hours (kWh) of electricity per month. Bills vary by state and region, as cost per kWh differs. To estimate average energy bills, multiply the average home’s electricity usage (897 kWh) by the cost per kWh in your state for that month. For example, the average cost per kWh in July for Colorado homes was 12.67 cents, which amounts to an average bill of about $113.65 (12.67 cents x 897 kWh) that month.
No deposit electricity plans also offer a subjective advantages. Thanks to smart meters, electricity providers can offer you smartphone apps that send notifications when your balance is getting low, so you can purchase more kilowatt-hours before your account drops to zero. However, this also means you will track your energy consumption more frequently, as opposed to only once per billing period. Energy consumers who monitor their kilowatt-hour usage tend to consume less energy that those who only wait for power bills once per billing period.

Intraday Data provided by SIX Financial Information and subject to terms of use. Historical and current end-of-day data provided by SIX Financial Information. All quotes are in local exchange time. Real-time last sale data for U.S. stock quotes reflect trades reported through Nasdaq only. Intraday data delayed at least 15 minutes or per exchange requirements.

The weakest S&P 500 subsector during 2014 was Oil and Gas Drilling, down 46%, which wasn’t very surprising, considering the price of oil dropped 50% from its peak in June through the end of the year. That subsector has risen 6% this year through Monday’s close, showing that there’s plenty of buying taking place. Most other subsectors within energy declined last year, but only three have risen so far in 2015.
Excessive Total Harmonic Distortions (THD) and not unity Power Factor (PF) is costly at every level of the electricity market. Cost of PF and THD impact is difficult to estimate, but both can potentially cause heat, vibrations, malfunctioning and even meltdowns. Power factor is the ratio of real to apparent power in a power system. Drawing more current results in a lower power factor. Larger currents require costlier infrastructure to minimize power loss, so consumers with low power factors get charged a higher electricity rate by their utility.[130] True power factor is made of displacement power factor and THD. Power quality is typically monitored at the transmission level. A spectrum of compensation devices[131] mitigate bad outcomes, but improvements can be achieved only with real-time correction devices (old style switching type,[132] modern low-speed DSP driven[133] and near real-time[134]). Most modern devices reduce problems, while maintaining return on investment and significant reduction of ground currents. Power quality problems can cause erroneous responses from many kinds of analog and digital equipment, where the response could be unpredictable.
Most common distribution network and generation is done with 3 phase structures, with special attention paid to the phase balancing and resulting reduction of ground current. It is true for industrial or commercial networks where most power is used in 3 phase machines, but light commercial and residential users do not have real-time phase balancing capabilities. Often this issue leads to unexpected equipment behavior or malfunctions and in extreme cases fires. For example, sensitive professional analogue or digital recording equipment must be connected to well-balanced and grounded power networks. To determine and mitigate the cost of the unbalanced electricity network, electric companies in most cases charge by demand or as a separate category for heavy unbalanced loads. A few simple techniques are available for balancing that require fast computing and real-time modeling.[135]
Since consumer demand directly affects energy rates, it’s important to note seasonal trends of demand throughout the year. Overall, demand tends to be higher during the winter and summer months and lower during the fall and spring months. This pattern isn’t shocking since it’s normal for people to require more energy during extreme heat and extreme cold.
July 2018 data, the latest available, show that the average U.S. price – 13.12 cents per kilowatt hour (kWh) – was down 0.7% compared with a year ago. If you live in Louisiana, you pay the lowest average residential electricity rates of any state in the country – 9.37 cents per kWh. The next lowest rate is in Washington, where residents pay an average of 9.79 cents per kWh.
While there is a very strong argument for providing cheap, subsidized power for the poorest in society, this should be done in a way that limits subsidies to the really deserving and the system as a whole needs to be able to charge tariffs that on average cover all costs. If this doesn’t happen then all manner of bad things will follow. As you might guess prices have been set too low by African governments. These subsidies have also been made too widely available, benefitting the elite and middle classes more than the poor (who, not having good access to the grid in the first place, don’t have ready access to these subsidies).
The two most common distinctions between customer classes are load size and usage profile. In many cases, time-of-use (TOU) and load factor are more significant factors than load size. Contribution to peak-load is an extremely important factor in determining customer rate class. Consumer loads may be characterized as peak, off-peak, baseload, and seasonal. Utilities rate each load differently, because each has different implications for a power system.
The local electric company is the utility – that’s the company who owns the infrastructure, including the poles and power lines that deliver electricity to your home. They are who you call if your power goes out or there's an emergency. But in almost every city in Texas, you must choose another company to supply that energy, called a Retail Electric Provider (REP). These REPs, like Spark Energy, allow you to choose electricity plans that offer competitive prices and plans to meet your needs.