Excessive Total Harmonic Distortions (THD) and not unity Power Factor (PF) is costly at every level of the electricity market. Cost of PF and THD impact is difficult to estimate, but both can potentially cause heat, vibrations, malfunctioning and even meltdowns. Power factor is the ratio of real to apparent power in a power system. Drawing more current results in a lower power factor. Larger currents require costlier infrastructure to minimize power loss, so consumers with low power factors get charged a higher electricity rate by their utility.[130] True power factor is made of displacement power factor and THD. Power quality is typically monitored at the transmission level. A spectrum of compensation devices[131] mitigate bad outcomes, but improvements can be achieved only with real-time correction devices (old style switching type,[132] modern low-speed DSP driven[133] and near real-time[134]). Most modern devices reduce problems, while maintaining return on investment and significant reduction of ground currents. Power quality problems can cause erroneous responses from many kinds of analog and digital equipment, where the response could be unpredictable.
Electricity pricing (sometimes referred to as electricity tariff or the price of electricity) varies widely from country to country and may vary significantly from locality to locality within a particular country. Many factors go into determining an electricity tariff, such as the price of power generation, government subsidies, local weather patterns, transmission and distribution infrastructure, and industry regulation. “Electricity prices generally reflect the cost to build, finance, maintain, and operate power plants and the electricity grid.”[1] Some utilities are for-profit, and their prices will also include a financial return for shareholders and owners. Electricity tariffs vary by type of customer, typically by residential, commercial, and industrial connections. Electricity price forecasting is the method by which a generator, utility company, or large industrial consumer can predict the wholesale prices of electricity with reasonable accuracy. The cost to supply electricity varies minute by minute.[1]

The simplest model for day ahead forecasting is to ask each generation source to bid on blocks of generation and choose the cheapest bids. If not enough bids are submitted, the price is increased. If too many bids are submitted the price can reach zero or become negative. The offer price includes the generation cost as well as the transmission cost, along with any profit. Power can be sold or purchased from adjoining power pools.[112][113][114]


The two most common distinctions between customer classes are load size and usage profile. In many cases, time-of-use (TOU) and load factor are more significant factors than load size. Contribution to peak-load is an extremely important factor in determining customer rate class. Consumer loads may be characterized as peak, off-peak, baseload, and seasonal. Utilities rate each load differently, because each has different implications for a power system.
Customers can find deals in competitive electricity markets if they take the time and effort to look at web sites such as powertochoose.org, the official comparison shopping site of the Public Utility Commission. The study cited a PUC survey of retail electricity offerings in Houston that showed nine deals in March that were lower than the regulated price of electricity in San Antonio.
The inclusion of renewable energy distributed generation and AMI in the modern electricity grid has introduced many alternative rate structures. Simple (or fixed) rate, tiered (or step) rate, TOU, demand rates, tiered within TOU, seasonal, and weekend/holiday rates are among the few residential rate structures offered by modern utilities. The simple rate charges a specific dollar per kilowatt ($/kWh) consumed. The tiered rate is one of the more common residential rate programs, and it charges a higher rate as customer usage increases. TOU and demand rates are structured to help maintain/control a utility’s peak demand. The concept at its core is to discourage customers from contributing to peak-load times by charging them more money to use power at that time.
Studies show that generally demand for electricity is driven largely by temperature. Heating demand in the winter and cooling demand (air conditioners) in the summer are what primarily drive the seasonal peaks in most regions. Heating degree days and cooling degree days help measure energy consumption by referencing the outdoor temperature above and below 65 degrees Fahrenheit, a commonly accepted baseline.[123]
You can sort, filter, and shop by pricing at YOUR specific usage level, which lets you shop and compare electricity plans based on the rates you’ll actually experience on your bill, inclusive of hidden fees and taxes. This ensures you’re not misled by the cheaper rates often advertised by electric providers…those “teaser rates” associated with higher usage levels that many households never enjoy because their usage level never reaches that pricing tier.
Short-term prices are impacted the most by weather. Demand due to heating in the winter and cooling in the summer are the main drivers for seasonal price spikes.[121] In 2017, the United States is scheduled to add 13 GW of natural-gas fired generation to its capacity. Additional natural-gas fired capacity is driving down the price of electricity, and increasing demand.
A feed-in tariff (FIT) is an energy-supply policy that supports the development of renewable power generation. FITs give financial benefits to renewable power producers. In the United States, FIT policies guarantee that eligible renewable generators will have their electricity purchased by their utility.[2] The FIT contract contains a guaranteed period of time (usually 15–20 years) that payments in dollars per kilowatt hour ($/kWh) will be made for the full output of the system.
Prepaid electricity plans are yet another option available to Texas customers. Prepaid plans let you avoid credit checks and deposits by pre-paying for your electricity. Prepaid electricity plans typically do not have a fixed duration and operate on a pay-as-you-go basis. Shopping for prepaid electricity can often yield relatively cheap electricity with no deposit. See Prepaid Electricity: Is It Right For Me? for more.
Customers can find deals in competitive electricity markets if they take the time and effort to look at web sites such as powertochoose.org, the official comparison shopping site of the Public Utility Commission. The study cited a PUC survey of retail electricity offerings in Houston that showed nine deals in March that were lower than the regulated price of electricity in San Antonio.

Another unwelcome side effect of not knowing your average monthly kWh usage level is that you may end up paying more than you expect. This can occur when a customer inadvertently shops an electric rate based on a higher usage level than they actually use. Electricity suppliers commonly advertise their electric rates associated with the highest (2000 kWh) usage levels since those tend to be the lowest rates.

If you live in the greater Houston area, there are over 60 different energy suppliers competing for your business. Many of these providers have websites that are confusing and difficult to navigate, their rates buried in misleading advertising and dense jargon. Who has the time to sort through and keep track of options across all these different sites?


In Texas' deregulated energy market, customers must pick their own electricity provider, all of which offer different rates per hour of power usage. You can shop for other power plans on the state-run website,  www.powertochoose.org, or try an alternative website, like www.texaspowerguide.com to help find the cheapest plan. Keep in mind that many retail electricity contracts carry penalties for early termination.
Should you choose a short-term, long-term, month-to-month, or prepaid plan? The short answer: it depends on your specific needs. How long do you anticipate living at your location? Are you deciding in the peak season (summer in Houston) or off season? All electricity providers in Houston offer a broad selection of plans for different contract lengths. Many also offer month-to-month and prepaid electricity plans. The bottom line is that everyone’s needs are different and all contract term lengths offer advantages and disadvantages.
The average home in the U.S. consumes 897 kilowatt hours (kWh) of electricity per month. Bills vary by state and region, as cost per kWh differs. To estimate average energy bills, multiply the average home’s electricity usage (897 kWh) by the cost per kWh in your state for that month. For example, the average cost per kWh in July for Colorado homes was 12.67 cents, which amounts to an average bill of about $113.65 (12.67 cents x 897 kWh) that month.
Quick Electricity prepaid electricity is for Texas residents who prefer to pay ahead for their electric service rather than receive an end of the month bill. Benefits of prepaid lights include a fast, same day electric connection, avoiding a credit check, zero down, daily usage reminders, easy payments and in some cases, free power. Our service territory includes the Dallas/Fort Worth metroplex, Houston and surrounding areas, Abilene, Corpus Christi, Galveston, Odessa, Waco, McAllen, the Rio Grande Valley and 400+ Texas towns in between. Call us now (877) 509-8946 to sign up for prepaid energy or order online day or night.

 1.     Contracts:  Before, there were no contracts.  You signed up or you didn’t.  When it’s the only game in town, you have to play by their rules.  Nowadays, you’ll see these ultra-fabulous rates bandied about but it’s only by carefully scrutinizing the fine print that you’ll discover those wonderful rates come with a one-year lock-down or other catches.


Keeping on top:  With deregulation, a whole host of electric resellers jumped into the market because there’s a whole lot of electricity to sell:  if Texas were a country, it’d be the 11th largest electricity consumer in the world!  Just by itself, it uses as much electricity as Spain or Great Britain!  That means there’s a whole lot of information you have to find, absorb, and process to make sure you’re getting the best rate for your needs.
Quick Electricity prepaid electricity is for Texas residents who prefer to pay ahead for their electric service rather than receive an end of the month bill. Benefits of prepaid lights include a fast, same day electric connection, avoiding a credit check, zero down, daily usage reminders, easy payments and in some cases, free power. Our service territory includes the Dallas/Fort Worth metroplex, Houston and surrounding areas, Abilene, Corpus Christi, Galveston, Odessa, Waco, McAllen, the Rio Grande Valley and 400+ Texas towns in between. Call us now (877) 509-8946 to sign up for prepaid energy or order online day or night.
On the other hand, month-to-month variable rate (no-contract) plans don’t have cancellation fees. You won’t be penalized if you find a better deal elsewhere and want to make another switch.  And, you won’t be stuck paying more than you should be if the market rate for electricity trends down.  But, if it goes up, you’ll be paying more than your in-contract neighbors, and you’ll likely want to shop around again for a better deal.
You betcha! Most Texas electricity suppliers offer plans that include a percentage of energy sourced from renewable resources, such as hydro power, wind power and solar power. Some are totally sourced that way. These plans are a great way for Texas energy customers to help the environment without breaking the bank. In addition to green energy plans, many Texas suppliers give customers the option to purchase renewable energy certificates, or RECs, that further offset customers’ carbon emissions. The purchase of RECs also helps fund research and usage of renewable energy sources, so that Texas can stay at the forefront of eco-friendly power technology.
In Maryland, you have the power to choose your electricity and natural gas suppliers. More than 500,000 Marylanders have already switched energy suppliers. Need a good reason to switch? Some suppliers regularly offer rates and service that are 10% or more cheaper than the utility. Things could get worse - Baltimore Gas and Electric Co. has proposed a rate increase it says would boost the average residential customer's total bill by $5.77 per month. A recent Choose Energy survey found that more than 86 percent say they've never chosen a competitive Maryland electricity plan, meaning they're probably paying more than they have to for energy. Don't pay more. Just enter your ZIP code above to see how you can begin saving with Choose Energy!
Unlike with long-term plans, monthly, variable rate (no-contract) plans have no cancellation fees. You won’t have to pay a penalty if you decide to take your business elsewhere because you found a better deal. Plus, you won’t be left paying more than you should if the market rate for energy trends down. However, if the market prices rise, you’ll have to pay more than those who are in-contract.
×