Although conventional long-term contracts may offer you very low kilowatt-hour prices, these contracts also impose many obligations and hefty penalties for non-compliance. No deposit electric plans tend to have a slightly higher energy price that long-term contracts, but allow more freedom in how you pay for your electricity. The most relevant differences between no deposit electricity plans and conventional contracts are summarized in the following table:
The two most common distinctions between customer classes are load size and usage profile. In many cases, time-of-use (TOU) and load factor are more significant factors than load size. Contribution to peak-load is an extremely important factor in determining customer rate class. Consumer loads may be characterized as peak, off-peak, baseload, and seasonal. Utilities rate each load differently, because each has different implications for a power system.
At Quick Electricity, we’ve outlined the best Texas electricity plans ranging from one month to two years. No deposit electricity plans are great for people who are constantly moving, college students, renters, or those who want to try an electric company before locking themselves into a fixed rate energy plan. Long-term plans are for people who want to lock in a low rate, and not have to worry about fluctuations in that rate for quite a while.
Utility companies are responsible for transmission and delivery of electricity even in energy deregulated parts of Texas and should be contacted in the event of a power outage. Your retail energy supplier may provide you competitive electric rates or exceptional customer service, but they cannot repair power lines or restore your service. In the case of an emergency, contact:
We've pioneered our techniques and grown our expertise in the retail energy industry for more than a decade. With hundreds of thousands of customers and firm investor backing, we're a company you can count on. Spark Energy is also proud to be a publically traded company: our NASDAQ ticker is SPKE. Visit our investor relations page for more information.
Excessive Total Harmonic Distortions (THD) and not unity Power Factor (PF) is costly at every level of the electricity market. Cost of PF and THD impact is difficult to estimate, but both can potentially cause heat, vibrations, malfunctioning and even meltdowns. Power factor is the ratio of real to apparent power in a power system. Drawing more current results in a lower power factor. Larger currents require costlier infrastructure to minimize power loss, so consumers with low power factors get charged a higher electricity rate by their utility. True power factor is made of displacement power factor and THD. Power quality is typically monitored at the transmission level. A spectrum of compensation devices mitigate bad outcomes, but improvements can be achieved only with real-time correction devices (old style switching type, modern low-speed DSP driven and near real-time). Most modern devices reduce problems, while maintaining return on investment and significant reduction of ground currents. Power quality problems can cause erroneous responses from many kinds of analog and digital equipment, where the response could be unpredictable.
Utilities, or energy companies, in Maryland offer customers information to know how much they are spending on electric supply each month. Baltimore Gas & Electric Co., for example, provides a tool known as the Standard Offer Service, which shows customers how much they can expect to pay for energy supply each month. Current supply rates show that BGE customers will pay 8.225 cents per kilowatt hour (kWh). ChooseEnergy.com, as of mid-May, offers a 36-month plan that could save 13 percent on that rate now.
In Dallas, 0% of people have switched to a plan that has some renewable energy component to it. Another 0% have switched to a plan that is partially renewable, while 0% have switched to a plan that powers homes completely by renewable electricity. This of course means that 100% of people have remained on a plan powered by traditional sources of electricity such as coal or nuclear power.
Even though it’s not ideal for either party, both customers and electric service providers have to purchase electricity at current market rates. Strategically timing your switch to a new electricity provider can help you score the best electric rates in a market that’s out of your control. Another way to feel more in control when switching energy suppliers is to sign up for a fixed-rate plan.
The average home in the U.S. consumes 897 kilowatt hours (kWh) of electricity per month. Bills vary by state and region, as cost per kWh differs. To estimate average energy bills, multiply the average home’s electricity usage (897 kWh) by the cost per kWh in your state for that month. For example, the average cost per kWh in July for Colorado homes was 12.67 cents, which amounts to an average bill of about $113.65 (12.67 cents x 897 kWh) that month.
Technology also provides a long-term answer, even if it contributes to the problem in the short-term, as described earlier. As renewable power and storage technologies become cheaper and more efficient they will gradually allow for the implementation of cheaper mini-grids and smart grids, increasingly within the reach of the really poor, even in urban areas. Perhaps, grids will one day become marketplaces allowing people to sell excess power from their solar installations to those who have a need for power at that time. Prices can be set dynamically to allow supply to match demand.
Texas deregulated most of the state's electricity markets in 2002, a move aimed at lowering electricity costs by letting consumers choose their own electric power providers and their own plans. Some parts of Texas continued to be regulated, including those whose power is proved by municipally-owned utilities, electric cooperatives and investor-owned utilities that operate outside the state's primary power grid.
There are over 60 different energy suppliers competing for your business on any given day in Texas. Many of these electric companies have websites that are confusing and nearly impossible to navigate, their rates and fees hidden by dense industry jargon and misleading advertising. Who has the spare the time to sort through the choices spread out over all these different sites and companies?