You betcha! Most Texas electricity suppliers offer plans that include a percentage of energy sourced from renewable resources, such as hydro power, wind power and solar power. Some are totally sourced that way. These plans are a great way for Texas energy customers to help the environment without breaking the bank. In addition to green energy plans, many Texas suppliers give customers the option to purchase renewable energy certificates, or RECs, that further offset customers’ carbon emissions. The purchase of RECs also helps fund research and usage of renewable energy sources, so that Texas can stay at the forefront of eco-friendly power technology.
For example, in 2012, Hawaii residents had the highest average residential electricity rate in the United States (37.34¢/kWh), while Louisiana residents had the lowest average residential electricity costs (8.37¢/kWh). Even in the contiguous United States the gap is significant, with New York residents having the highest average residential electricity rates in the lower 48 U.S. states (17.62¢/kWh).[6]

Excessive Total Harmonic Distortions (THD) and not unity Power Factor (PF) is costly at every level of the electricity market. Cost of PF and THD impact is difficult to estimate, but both can potentially cause heat, vibrations, malfunctioning and even meltdowns. Power factor is the ratio of real to apparent power in a power system. Drawing more current results in a lower power factor. Larger currents require costlier infrastructure to minimize power loss, so consumers with low power factors get charged a higher electricity rate by their utility.[130] True power factor is made of displacement power factor and THD. Power quality is typically monitored at the transmission level. A spectrum of compensation devices[131] mitigate bad outcomes, but improvements can be achieved only with real-time correction devices (old style switching type,[132] modern low-speed DSP driven[133] and near real-time[134]). Most modern devices reduce problems, while maintaining return on investment and significant reduction of ground currents. Power quality problems can cause erroneous responses from many kinds of analog and digital equipment, where the response could be unpredictable.
2.     Fraud:  Too many people have been victimized by glib sales reps with promises of cheap electricity flowing in an unending stream only to discover that, as is so often true, “it ain’t necessarily so”.  They’ve been locked into unwanted term contracts or there’s a catch – some utilities will give you the great rate only if you meet a usage minimum; basically, the “rate” is, in actuality, a “bulk purchase” discounted fee – or they paid a deposit never to hear from the rep again.
There are many reasons for this but I’d like to focus on African power utilities. Power utilities are a very important part of the chain for delivering electrical power to end users. One of their key roles is to purchase power that has been generated by others, sell it on to end-users and to collect revenues. They are vital for extending grid-based power to consumers and to ensure regular and efficient power supply. As they collect money from end-users and pay it on to other players in the system, they are also vital in ensuring money flows through the entire power sector.

Prepaid electricity plans are yet another option available to Texas customers. Prepaid plans let you avoid credit checks and deposits by pre-paying for your electricity. Prepaid electricity plans typically do not have a fixed duration and operate on a pay-as-you-go basis. Shopping for prepaid electricity can often yield relatively cheap electricity with no deposit. See Prepaid Electricity: Is It Right For Me? for more.

Prices for any single class of electricity customer can vary by time-of-day called TOU or time of use or by the capacity or nature of the supply circuit (e.g., 5 kW, 12 kW, 18 kW, 24 kW are typical in some of the large developed countries); for industrial customers, single-phase vs. 3-phase, etc. Prices are usually highest for commercial and residential consumers because of the additional costs associated with stepping down their distribution voltage. The price of power for industrial customers is relatively the same as the wholesale price of electricity, because they consume more power at higher voltages. Supplying electricity at transmission-level high voltages is more efficient, and therefore less expensive.
Ironically, technology can make the utilities’ problem worse, not better—at least in the short term. In the past, grids were developed because it was cheaper to generate large quantities of power and distribute it over wide distances, rather then generate smaller quantities closer to the place of use. It is for this reason that electricity is seen as a business that benefits from “economies of scale”.
No. When you’ve chosen a new deal, your new supplier will handle the switching process. They’ll contact you to let you know what date you’ll be transferred over, and they’ll contact you around the switching date to ask for a meter reading. They’ll pass this on to your old supplier so they can send you a final bill. You don’t need to contact your old supplier, as the new supplier will handle everything for you.
Whether you live in a large city or small town, we can save you money! Where do we provide Texas electricity? We service customers in more than 400 deregulated communities in Texas. We work with principal utilities throughout the state of Texas to provide prepaid electricity. The utilities are: Oncor in the Dallas / Fort Worth Metroplex and various parts of West Texas; CenterPoint Energy in Houston and the surrounding areas; AEP Central in Corpus Christi and surrounding areas; AEP North in Abilene and other North Texas communities.

The UK has been a net importer of energy for over a decade, and as their generation capacity and reserves decrease the level of importing is reaching an all-time high.[127] Their fuel price's dependence on international markets has a huge effect on the cost of electricity, especially if the exchange rate falls. Being energy dependent makes their electricity prices vulnerable to world events, as well.

Although conventional long-term contracts may offer you very low kilowatt-hour prices, these contracts also impose many obligations and hefty penalties for non-compliance. No deposit electric plans tend to have a slightly higher energy price that long-term contracts, but allow more freedom in how you pay for your electricity. The most relevant differences between no deposit electricity plans and conventional contracts are summarized in the following table:
Electricity cannot be stored as easily as gas, it is produced at the exact moment of demand. All of the factors of supply and demand will therefore have an immediate impact on the price of electricity on the spot market. In addition to production costs, electricity prices are set by supply and demand.[120] However, some fundamental drivers are the most likely to be considered.
Once you sign up for your new energy plan, your local utility will be notified of the change and begin your service from the alternative supplier at the beginning of your next billing cycle. Upon starting your energy supply service, your utility company will include this charge on your energy bill and continue to charge for the delivery service portion of your bill. Why? Because although your supplier may offer you a competitive rate for electricity supply, your utility is still in charge of the infrastructure that delivers energy to your home – such as power lines and energy meters.
A lot of these financial structures ultimately boil down to being a form of government guarantee, which means that they can’t be scaled up to “solve” countries’ power problems because the governments cannot carry all the liabilities. Countries try to introduce the private sector into power generation precisely to reduce such guarantees, which then end up returning through the back door in the form of government support.
Excessive Total Harmonic Distortions (THD) and not unity Power Factor (PF) is costly at every level of the electricity market. Cost of PF and THD impact is difficult to estimate, but both can potentially cause heat, vibrations, malfunctioning and even meltdowns. Power factor is the ratio of real to apparent power in a power system. Drawing more current results in a lower power factor. Larger currents require costlier infrastructure to minimize power loss, so consumers with low power factors get charged a higher electricity rate by their utility.[130] True power factor is made of displacement power factor and THD. Power quality is typically monitored at the transmission level. A spectrum of compensation devices[131] mitigate bad outcomes, but improvements can be achieved only with real-time correction devices (old style switching type,[132] modern low-speed DSP driven[133] and near real-time[134]). Most modern devices reduce problems, while maintaining return on investment and significant reduction of ground currents. Power quality problems can cause erroneous responses from many kinds of analog and digital equipment, where the response could be unpredictable.

Aside from times of natural disasters and large-scale accidents, electricity prices tend to be steadily dictated by electricity demand. Typically, the price of electricity rises when demand rises. In turn, the lower demand is, the cheaper electricity rates become. This pattern is due to the fact that increased demand requires increased energy production. When extra energy is demanded, utilities are forced to use alternative sources of energy production that may cost more to operate. For example, when electricity demand reaches a high point in Texas, coal plants are used alongside the typical natural gas plants. These coal plants are costlier and less effective than natural gas plants, but are necessary to meet high electricity demand levels.[1]
Keeping on top:  With deregulation, a whole host of electric resellers jumped into the market because there’s a whole lot of electricity to sell:  if Texas were a country, it’d be the 11th largest electricity consumer in the world!  Just by itself, it uses as much electricity as Spain or Great Britain!  That means there’s a whole lot of information you have to find, absorb, and process to make sure you’re getting the best rate for your needs.
The freedom to choose your energy rates in Maryland is not only available in homes but also to commercial customers. In fact, more than 90% of large businesses in the state have enrolled with alternative suppliers. This competition between energy suppliers to provide lower prices for businesses could be why commercial electric prices in Maryland are lower than the national average this year. If the same competition between suppliers existed for residential customers, prices might also decrease. However, without participation in energy choice, suppliers are not forced to compete for your business. Want to see the available rates? Enter your ZIP code above.
ElectricityPlans lets you easily compare electricity plans by displaying all-inclusive rates at all advertised usage levels in a simple easy-to-read format. You can easily estimate your actual all-in electric bill at any given usage level using our Plan Details and Pricing section for each plan. All energy charges, delivery fees, bill credits, and other fees for each plan are shown so you can accurately estimate your monthly electric bill. By showing all rates and fees, you’ll avoid the electric bill sticker shock and so-called “teaser rates” commonly used by electric suppliers to achieve better search results on sites such as powertochoose.org.
Compare and choose energy plans from the best electricity providers in Houston, Dallas, Fort Worth, Abilene, Waco, McAllen and all other energy deregulated cities in Texas: Direct Energy, First Choice Power, Frontier Utilities, Payless Power, Acacia Energy, Tara Energy, Sunfinity Solar and more. With most of these provider plans, you can even get same-day energy for free! Quick Electricity features many electric companies with free nights and weekends. Popular prepaid electricity plans include, Bright Choice, Power to Go Weekends and Deposit Saver. Call us now to get your lights on pronto!

Aside from times of natural disasters and large-scale accidents, electricity prices tend to be steadily dictated by electricity demand. Typically, the price of electricity rises when demand rises. In turn, the lower demand is, the cheaper electricity rates become. This pattern is due to the fact that increased demand requires increased energy production. When extra energy is demanded, utilities are forced to use alternative sources of energy production that may cost more to operate. For example, when electricity demand reaches a high point in Texas, coal plants are used alongside the typical natural gas plants. These coal plants are costlier and less effective than natural gas plants, but are necessary to meet high electricity demand levels.[1]


We've pioneered our techniques and grown our expertise in the retail energy industry for more than a decade. With hundreds of thousands of customers and firm investor backing, we're a company you can count on. Spark Energy is also proud to be a publically traded company: our NASDAQ ticker is SPKE. Visit our investor relations page for more information.
×