Wind and solar power are non-dispatchable. Such power is normally sold before any other bids, at a pre-determined rate for each supplier. Any excess is sold to another grid operator, or stored, using pumped-storage hydroelectricity, or in the worst case, curtailed.[116] Curtailment could potentially significantly impact solar power’s economic and environmental benefits at greater PV penetration levels.[117] Allocation is done by bidding.[118]
The local electric company is the utility – that’s the company who owns the infrastructure, including the poles and power lines that deliver electricity to your home. They are who you call if your power goes out or there's an emergency. But in almost every city in Texas, you must choose another company to supply that energy, called a Retail Electric Provider (REP). These REPs, like Spark Energy, allow you to choose electricity plans that offer competitive prices and plans to meet your needs.
The two most common distinctions between customer classes are load size and usage profile. In many cases, time-of-use (TOU) and load factor are more significant factors than load size. Contribution to peak-load is an extremely important factor in determining customer rate class. Consumer loads may be characterized as peak, off-peak, baseload, and seasonal. Utilities rate each load differently, because each has different implications for a power system.

†Offer is available to Texas residential customers who enroll using the Promotion Code “NIGHTSFREE”. Plan bills a monthly Base Charge, an Energy Charge, and passes through Utility Transmission and Distribution delivery charges. Energy Charges for usage consumed between 9pm and 7am each day is credited back on your bill. The utility charges, including delivery charges for night time hours, are passed through at cost and aggregated on your bill. See Electricity Facts Label for details.
In Dallas, 0% of people have switched to a plan that has some renewable energy component to it. Another 0% have switched to a plan that is partially renewable, while 0% have switched to a plan that powers homes completely by renewable electricity. This of course means that 100% of people have remained on a plan powered by traditional sources of electricity such as coal or nuclear power.
Because prices from energy companies in Maryland rise and fall depending on the wholesale price of energy, residents may want a more stable rate for a longer period. A fixed-rate energy plan offers you just that, with a consistent rate for the duration of your agreement at current energy prices – regardless of fluctuations in the energy market. This could mean protection from rate spikes and savings for electric utility customers.
Studies show that generally demand for electricity is driven largely by temperature. Heating demand in the winter and cooling demand (air conditioners) in the summer are what primarily drive the seasonal peaks in most regions. Heating degree days and cooling degree days help measure energy consumption by referencing the outdoor temperature above and below 65 degrees Fahrenheit, a commonly accepted baseline.[123]
During your search, it’s important to keep in mind that your timing may be the most important contributor to actually finding the lowest electricity rates. So when is the best time to find cheap electricity rates? With the market rates for electricity fluctuating on a daily basis, we know that pinpointing the best time to switch may seem difficult. Here at Think Energy, we want to provide you with information to determine the best time for you to score the lowest energy rates.

If you live in the greater Houston area, there are over 60 different energy suppliers competing for your business. Many of these providers have websites that are confusing and difficult to navigate, their rates buried in misleading advertising and dense jargon. Who has the time to sort through and keep track of options across all these different sites?


Excessive Total Harmonic Distortions (THD) and not unity Power Factor (PF) is costly at every level of the electricity market. Cost of PF and THD impact is difficult to estimate, but both can potentially cause heat, vibrations, malfunctioning and even meltdowns. Power factor is the ratio of real to apparent power in a power system. Drawing more current results in a lower power factor. Larger currents require costlier infrastructure to minimize power loss, so consumers with low power factors get charged a higher electricity rate by their utility.[130] True power factor is made of displacement power factor and THD. Power quality is typically monitored at the transmission level. A spectrum of compensation devices[131] mitigate bad outcomes, but improvements can be achieved only with real-time correction devices (old style switching type,[132] modern low-speed DSP driven[133] and near real-time[134]). Most modern devices reduce problems, while maintaining return on investment and significant reduction of ground currents. Power quality problems can cause erroneous responses from many kinds of analog and digital equipment, where the response could be unpredictable.
Although conventional long-term contracts may offer you very low kilowatt-hour prices, these contracts also impose many obligations and hefty penalties for non-compliance. No deposit electric plans tend to have a slightly higher energy price that long-term contracts, but allow more freedom in how you pay for your electricity. The most relevant differences between no deposit electricity plans and conventional contracts are summarized in the following table:
Even though it’s not ideal for either party, both customers and electric service providers have to purchase electricity at current market rates. Strategically timing your switch to a new electricity provider can help you score the best electric rates in a market that’s out of your control. Another way to feel more in control when switching energy suppliers is to sign up for a fixed-rate plan.
†Offer is available to Texas residential customers who enroll using the Promotion Code “NIGHTSFREE”. Plan bills a monthly Base Charge, an Energy Charge, and passes through Utility Transmission and Distribution delivery charges. Energy Charges for usage consumed between 9pm and 7am each day is credited back on your bill. The utility charges, including delivery charges for night time hours, are passed through at cost and aggregated on your bill. See Electricity Facts Label for details.
With over 2.3 million residents, Houston is the largest city in Texas and the fourth most populated in the United States. Encompassing over six hundred square miles, Houston stands as the fifth most popular metropolitan area in the country and gets its name from the commander who won Texas’ independence from Mexico in 1836. The city lies in the southeastern portion of the state within a deregulated Electricity market and as such, allows residents to select an energy provider from the various service companies that serve the state.
When it comes to pinpointing specific months rather than seasons, every part of the country has its own highest- and lowest-demand months. For example, hotter states, such as Texas, have their lowest demand anytime between December and March.[2] When it comes to your own location, you can determine typical demand trends by taking a look at your area’s weather patterns or your billing records that showcase your personal monthly demand levels.
Prepaid electric, or “pay as you go electricity” is a affordable choice for people with short term living arrangements as well as those wanting to eliminate light bills and need their lights on the same day. Prepaid electricity in Texas is rapidly growing in popularity. Thanks to smartphone apps, Texas college students are choosing to prepay for a fast, easy connection and payment. With smart meter technology, homeowners and renters can easily monitor, regulate and conserve their usage which saves money. Quick Electricity has energy plans to suit the customer preparing for an upcoming move, serving in the military, looking for green energy solutions, or simply wanting to take it month-to-month with no deposit. Don’t fit any of those molds? We can set you up to build your own energy plan!
To skirt the late summer electricity rate hikes, a little bit of planning can really pay off. Try to avoid signing new long-term electricity contracts in late summer. While it may be impossible to escape signing a new electricity contract if you’re moving during that time, just know that a short-term plan may make more sense until the rates go back down in the fall.  That way you’re not stuck paying a premium rate for an entire year or more.
The weakest S&P 500 subsector during 2014 was Oil and Gas Drilling, down 46%, which wasn’t very surprising, considering the price of oil dropped 50% from its peak in June through the end of the year. That subsector has risen 6% this year through Monday’s close, showing that there’s plenty of buying taking place. Most other subsectors within energy declined last year, but only three have risen so far in 2015.
You can organize and shop by pricing at YOUR individual usage level, which allows you to shop and compare energy plans based on the rates you’ll actually see appear on your bill, inclusive of taxes and hidden fees. You won’t be misled by the “teaser rates” tied with higher usage levels that many homes never experience, as their usage level never reaches that pricing tier.
×